How much does a Cardinal concrete floor coating cost?

Every project is customized to your specific floor — square footage, condition, colors, decorative options. Request a free in-home estimate and we'll measure the space and give you a firm number in 30-60 minutes.

What coating system does Cardinal Concrete Coatings install?

A polyaspartic + polyurea system. Concrete is diamond-ground and profiled first, then a polyurea base coat bonds to the slab, hand-broadcast vinyl flake is added for color and texture, and everything is sealed with a polyaspartic topcoat.

How long does the installation take?

Most residential projects wrap up in a single day of on-site work. Larger commercial projects or extensive prep (cracking, leveling, existing coating removal) can extend that.

How long do I need to stay off my new floor?

Most floors are ready for light foot traffic within a few hours of the final topcoat. We recommend waiting a day before moving heavier furniture back on, and longer for vehicle traffic on driveways. Your installer will give you exact timing at handoff.

How do I care for the coating day-to-day?

Standard sweeping and mopping with warm water or a pH-neutral cleaner. For stubborn spots, a non-abrasive cleaner works fine. No waxing, buffing, or specialty products required.

Will I need to reseal the coating later?

If you follow our simple maintenance and cleaning guidelines, no. The polyaspartic topcoat is the seal — it doesn't wear off the way traditional paints do.

Can the coating be installed over an existing coating?

In many cases, yes. If you have an old coating layer, we can sand, vacuum, and prep the surface first. We'll inspect the existing finish at the estimate to confirm whether it's a candidate for overcoating.

Can Cardinal coatings be used outside?

Yes. We install our polyaspartic + polyurea system on driveways, patios, pool decks, and hot-tub walkways across the Phoenix Valley.

Where can Cardinal coatings be installed?

Residential garages and outdoor surfaces (driveways, patios, pool decks), and commercial spaces (industrial floors, storefronts, hospitality patios, HOA common areas).

How does the install process work?

A six-step process: (1) diamond-grind and prep the concrete, (2) repair cracks with 100% solids, (3) apply a self-priming polyurea base coat, (4) hand-broadcast vinyl flake for color and texture, (5) scrape and level, (6) seal with the polyaspartic topcoat.

Do I really need a professional to install this?

For a floor you want to look right on day one and stay looking right, yes. Surface prep, moisture testing, and application technique all matter — and our crews install polyaspartic systems full-time, not as a side project.

What kind of warranty comes with the install?

Every Cardinal Concrete Coatings project on covered surfaces (garages, patios, pool decks, walkways, commercial floors, etc.) comes with our workmanship warranty. **No warranty is offered on driveway flake systems** — that exclusion applies in every state. Your installer will walk through the exact terms in writing at the estimate and again at handoff.

What is RevaFlex Rubber Surfacing?

A customizable rubber surface for pool decks and patios — typically installed right over the concrete you already have.

Get a Free Quote How It Works

RevaFlex & Cardinal Concrete Coatings

Cardinal Concrete Coatings installs RevaFlex on pool decks, patios, walkways, and splash areas. Every project is handled by our crew end-to-end — the same team that quotes your project also installs it.

What It Is

A Trowel-On Rubber Surface for Pool Decks & Patios

RevaFlex is small rubber granules mixed on site with a specially formulated resin, poured in place and trowelled to follow the existing surface. The result is a seamless, textured surface for pool decks, patios and walkways — typically installed directly over sound existing concrete, with no tear-out required.

Key Benefits

Why Homeowners and Pros Choose RevaFlex

Textured Finish

A textured, rubberized finish designed for a grippy feel — not glossy-smooth like paint.

Range of Colors

Standard colors plus custom blends, so the finish can complement your home, pool and landscaping.

Installs Over Existing Surfaces

Typically installed over sound existing concrete and other solid surfaces — often no tear-out required.

Seamless Surface

Poured and trowelled in place as one continuous surface — no pavers, tiles or grout lines.

Cushioned Feel

The rubber granules give the surface a softer, cushioned feel underfoot.

Simple Routine Care

Sweep it and rinse it with a hose. Your installer walks you through care for your surface.

Made for Pool Decks & Patios

Pool decks, patios, walkways, splash areas and playgrounds — the outdoor spaces you live on.

How It Works

The 5-Step Install

Prep

The existing surface is cleaned, repaired where needed, and prepared for the install.

Mix & Pour

Rubber granules and a specially formulated resin are mixed on site, then poured to spec.

Smooth & Cure

Trowelled to follow the contour of the surface and left to cure — uniform thickness, no seams.

Weave in Designs

Custom patterns or color blends can be worked into the surface during the install.

Walkthrough

Your installer reviews cure time and care with you before the area goes back into use.

Product Compatibility

Bonds Directly to Most Substrates

RevaFlex installs over the surfaces you already have — no demo or pour-back required.

Concrete
Asphalt
Wood
Metal
Brick
Stone

Want to see more RevaFlex projects, colors and product details?

Visit revaflexsurfaces.com

Common Questions

RevaFlex FAQ

What is RevaFlex?

RevaFlex is a rubber surfacing system for pool decks, patios and other outdoor areas. Small rubber granules are mixed on site with a specially formulated resin, poured in place, and trowelled into a seamless, textured surface.

Where can RevaFlex be installed?

RevaFlex is made for pool decks, patios, walkways, splash areas and playgrounds. It is typically installed over sound existing concrete or another solid surface — your installer inspects the area and confirms it is a good fit during your free estimate.

How long does installation take?

It depends on the size of the area and the prep involved. Many residential projects are completed in about a day, and your installer will tell you how long to wait before using the surface.

What colors does RevaFlex come in?

Standard colors are available, plus custom color blends on request. Your installer can bring samples so you can see them in person.

How do I care for it?

Routine care is simple — sweep it and rinse it with a hose. Your installer will walk you through care for your specific surface.

Who installs RevaFlex?

Cardinal Concrete Coatings installs RevaFlex with our own crew. The same team that quotes your project installs it and follows up afterwards.

Get a RevaFlex Quote from Cardinal Concrete Coatings

Tell us about your pool deck or patio and we'll get back to you fast with a free, no-obligation quote.

Request a Free Quote

More Information About Our Coatings: